• Two way on-off, 2 Way Angle or 3 way switching models.
• Blow-Out Proof Bottom Loaded stem.
• Low operating torque with SS lever/Fenolic handle.
• Full or reduced Bore for Perfect Flow.
• Floting ball design for positive seating.
• Working Pressure from 1000 PSI to 6000 PSI.
• With PTFE seat.

Standard Test : Each valve is factory tested with nitrogen at 1000 psig (69 bar) for leakage at the seat and packing, the maximum allowable leak rate of 0.1 SCCM.

Optional Hydrostatic test : This test is performed with de ionised water at 1.5 times the working pressure. Other Tests like vibration, temperatures, helium etc are available upon requests.

All exposed threads of the products are protected with plastic caps to prevent damage and each assembly is packed in sealed and clear polyethylene bag for cleanliness and carefully packed in cardboard boxes to prevent transit damage. Each and every package is labelled for proper and easy identification.